Trident Make Heatless Air Dryer WORKING PRINCIPLE Drying Cycle : Moist air from the compressor is sent through the coalescing filter. Here water & oil coalesces and purges through the auto drain valve. The relatively clean air with water vapour passing through the aluminum drying tower filled with desiccant gets completely dried (up to -400C PDP) and then passes through a built in after filter (25 micron). The desiccant fines from the towers are completely removed and clean dry air is let out through the outlet port for use. Regeneration Cycle: During the regeneration cycle, the sudden depressurisation brings out water molecule strapped in the Desiccant pores to the surface of the beads. A small portion of dry compressed air from the drying tower then passes over the desiccant through the regeneration orifice built in the Top Block. This results in complete regeneration of the Desiccant. Dryers Features: ApplicationPainting And Powder Coating, Machine Tool, PackagingApplication, Auto Garage, Textile & Garment, Instrumentation,  Pharmaceutical,  Dental Laboratory, Rail Vehicles, Telecomm industry (pressurises its underground cables to repel moisture and avoid shorts), Pneumatic control systems, Feed air for Zeolite type Oxygen and Nitrogen generators, Truck and Train Air brake systems. SpecificationsMaximum Operating Pressure : 16 kg/cm2(g)Air Inlet Temperature : 380C MaxOperating Pressure : 7 kg/cm2(g)Pre-Filter Rating : 0.01 MicronCycle Time : 4 MinutesOperating Voltage : 100-240 VAC 50/60 Hz 1 PhOutlet Conditions : Dry air at -400C PDP*Purge Loss : 15±1% Available Range : 10 CFm to 375 CFM Generally This heatless air dryer are used with oil free compressor. Please check the below post for oil free compressors. See Also : Trident Make Refrigerated Air Dryer Your Inquiry is Important To Us. Submit Now.